 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CCD Area Image Sensor MN39160FH 4.5 mm (type-1/4) 680k-pixel CCD Area Image Sensor I Overview The MN39160FH is a 4.5 mm (type-1/4) interline transfer CCD (IT-CCD) solid state image sensor device. This device uses photodiodes in the optoelectric conversion section and CCDs for signal readout. The electronic shutter function has made an exposure time of 1/10 000 seconds possible. Further, this device has the features of high sensitivity, low noise, broad dynamic range, and low smear. This device has a total of 681 739 pixels (1 007 horizontal x 677 vertical) and provides stable and clear images with a resolution of 600 horizontal TV-lines and 420 vertical TV-lines. Part Number Size System NTSC Color or B/W Color (Top View) I Pin Assignment V4 V3 V2 V1 GND TEST VDD 1 2 3 4 5 6 7 14 13 12 11 10 9 8 PT Sub H2 H1 R GND VO MN39160FH 4.5 mm (type-1/4) I Features * Effective pixel number 962 (horizontal) x 654 (vertical) * High sensitivity * Broad dynamic range * Low smear * Electronic shutter I Applications * Camcorders * FA, OA cameras Publication date: July 2001 SMD00001AEC 1 MN39160FH I Block Diagram (4 columns OB + 962 columns valid area + 41 columns OB) (2 dummies + OB11 + valid area 654 + OB12 ) Sub 13 V4 2 V3 3 4 Vertical shift register 1 V2 V1 Photo diode VO VDD GND 8 7 9 Output section Horizontal register (one dummy at the front, no dummy at the back) GND 6 TEST *1 14 PT 5 10 11 H1 R *1 : TEST pin must be left open, because the pin outputs CCD internal bias voltage. I Pin Descriptions Pin No. Symbol 1 2 3 4 5 6 7 V4 V3 V2 V1 GND TEST VDD Descriptions Vertical shift register clock pulse 4 Vertical shift register clock pulse 3 Vertical shift register clock pulse 2 Vertical shift register clock pulse 1 GND TEST pin (OPEN) Power supply *1 Pin No. Symbol 8 9 10 11 12 13 14 VO GND R H1 H2 Sub PT H2 12 Descriptions Video output GND Reset pulse (RG) Horizontal register clock pulse 1 Horizontal register clock pulse 2 Substrate P-well for protection circuit Note) *1: TEST pin must be left open, because the pin outputs CCD internal bias volltage. I Device Parameter (H x V) Parameter Pixel number *1 Value 962 x 654 3.655 6 x 2.714 1 3.80 x 4.15 Unit pixel mm2 m2 Image sensing block dimension Pixel dimension Note) *1: OB columns are not included. 2 SMD00001AEC MN39160FH I Absolute Maximum Ratings and Operating Conditions Absolute maximum rating Parameter VDD VPT *3, 4 Operating condition min 14.5 -7.5 3.0 typ 15.0 -7.0 0 3.3 max 15.5 -6.5 3.6 Unit Lower limit - 0.2 -10.0 - 0.2 - 0.2 - 0.2 Upper limit 18 0.2 V V V V V GND VR VH1 VH2 VSub *2 *1 (Reference voltage) High-Low Bias High Low High Low 8 8 35 18 15 18 15 60 80 8 (Supplied internally) 3.0 - 0.2 3.0 - 0.2 (Supplied internally) 21.0 14.5 - 0.05 -7.5 - 0.05 -7.5 14.5 - 0.05 -7.5 - 0.05 -7.5 22.0 15.0 0 -7.0 0 -7.0 15.0 0 -7.0 0 -7.0 25 23.0 15.5 0.05 -6.5 0.05 -6.5 15.5 0.05 -6.5 0.05 -6.5 -9 -9 -9 -9 -10 -30 3.3 0 3.3 0 3.6 0.2 3.6 0.2 V V V V V V V V V V V V V V V V C C VSub VV1 *3, 4 High Middle Low VV2 VV3 *3, 4 Middle Low *3, 4 High Middle Low VV4 *3, 4 Middle Low Operating temperature Storage temperature SMD00001AEC 3 MN39160FH I Absolute Maximum Ratings and Operating Conditions (continued) Note) 1. Standard photo detecting condition Standard photo detecting condition stands for detecting image with a light source of color temperature of 2 856K, luminance of 1 050 cd/m2, and using a color temperature conversion filter LB-40 (HOYA), infrared cut filter CAW-500S with thickness 2.5 mm for a light path and with F8 lens aperture. The quantity of the incidental light to a photo-detecting surface under the above condition is defined as the standard quantity of light. 2. *1: VSub when using electronic shutter function VSub H VSub (V) VSub L GND VSub (V) (Supplied internally) * Sub pulse generates once every 1 V period. *2: VSub supplied internally is the voltage suppressing the blooming generation at x500 light quantity relative to the standard light quantity. *3: Relation between VPT and VVL Set VPT under the following condition against VL of a vertical transfer clock waveform. VPT VL (VV1L to VV4L) - 0.2 < VV - VPT < 24.5 (V) *4: Absolute maximum ratings I Optical Characteristics Parameter Carrier saturation output Sensitivity Vertical smear Symbol Sc So Sm J chart J chart F1.4, 1/32 ND 1/10 V chart, F1.4 Conditions Min 500 80 Typ 110 Max 0.01 Unit mV mV % Note) The above-mentioned characteristics are the values on driving the device for the imaging stabilizer mode (1/60 seconds accumulation). 4 SMD00001AEC MN39160FH I Timing Diagram * High speed pulse timing H1 50% 50% 50% 27.8 ns 3 ns CCD output R 50% 50% 1 ns 3 ns 10 ns 13.9 ns Clamp pulse (DS1) 50% 50% 3 ns 3 ns 13.9 ns 3 ns Sampling pulse (DS2) 50% 50% 4 ns 3 ns 13.9 ns 3 ns SMD00001AEC 5 MN39160FH I Timing Diagram (continued) * Rise time and fall time of each pulse V1 , V3 0.9 0.9 0.1 0.9 0.1 0.9 0.1 300 ns V2 , V4 300 ns 300 ns 0.1 300 ns 0.9 0.9 0.1 300 ns H1 , H2 0.9 0.9 R 0.1 300 ns 0.9 0.9 0.1 8 ns 0.1 8 ns 0.1 6 ns 0.1 6 ns 6 SMD00001AEC MN39160FH I Color Filter Arrays for CCD 654 653 Cy Mg Ye G Cy Mg Ye G Cy Mg Ye G Cy Mg Ye G Cy Mg Ye G 8 7 6 5 4 3 2 1 Cy G Cy Mg Cy G Cy Mg 1 Ye Mg Ye G Ye Mg Ye G 2 Cy G Cy Mg Cy G Cy Mg 3 Ye Mg Ye G Ye Mg Ye G 4 Cy G Cy Mg Cy G Cy Mg 5 Ye Mg Ye G Ye Mg Ye G 6 Cy G Cy Mg Cy G Cy Mg 7 Ye Mg Ye G Ye Mg Ye G 8 Cy G Cy Mg Cy G Cy Mg Ye Mg Ye G Ye Mg Ye G 961 962 I Graph of Characteristics CCD color filter spectral characterisitics 1.2 Ye 1.0 0.8 Relative sensitivity 0.6 Cy Gr 0.4 Mg 0.2 0 400 450 500 550 600 650 700 750 800 Wavelength (nm) SMD00001AEC 7 MN39160FH I Package Dimensions (unit: mm) * WDIP014-P-0400H 10.000.08 9.000.10 5.000.08 14 8 Reference plane 5.000.08 9.000.10 10.000.08 0.015 Valid pixel center (0.60) (1.19) 1.27 0.300.05 3.500.20 1.300.10 0.3 M 1 7 2-R0.40 (depth 0.30) 14 8 1. The center of the package is equal to the center of the effective pixel area. 2. The rotation angle of the effective pixel area: up to 1.0 degree 3. The distance from the bottom face of the package to the surface of the effective pixel area: 1.41 mm 0.1 mm 4. The tilt of the effective pixel area for the bottom face of the package: up to 25 m 5. Thickness of seal glass is 0.7 mm 0.1 mm, and the refractive index is 1.50. 6. Package weight: 0.55 g (typ.) 8 (2.50) (2.50) SMD00001AEC 3.30.15 (1.30) 0.250.05 (0.7) 1 7 10.160.25 |
Price & Availability of MN39160FH
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |